Changes between Version 3 and Version 4 of ProdSimStartup

Timestamp:

02/26/2019 06:50:24 AM (7 years ago)

Author:

jdalbey

Comment:

update

ProdSimStartup

@@ -1 +1 @@
 == HOWTO Production System Startup ==
-
 Feb 22, 2018
 
@@ -9 +8 @@
 In the folder `/opt/FEPSimulator` launch 'runFEPSim'
 
-The terminal should respond "Running FEP Simulator..."
+The terminal should respond "Running FEP Simulator..."  
+
+(Note: this didn't work for me on 02/25/2019.  I checked out the branch from svn and ran that one in my own account.)
 
 On the Windows Desktop, launch 'CADserver - 2017'
@@ -15 +16 @@
 On the Windows Desktop, launch 'ATMS Batch Driver'
 
-Observe "Building network..." message, Wait about 20 seconds.
-The ATMS Batch Driver window will appear, and logging messages will appear in the Putty window.  Within 30 seconds the traffic network display from the ATMS client should show green dots on all the highways.
+Observe "Building network..." message, Wait about 20 seconds. The ATMS Batch Driver window will appear, and logging messages will appear in the Putty window.  Within 30 seconds the traffic network display from the ATMS client should show green dots on all the highways.
 
 On the Windows Desktop, launch 'Run !SimManager'
@@ -24 +24 @@
 Start CAD Clients if desired.
 
-If desired, On the Windows Desktop, launch '!ClockClient' 
+If desired, On the Windows Desktop, launch '!ClockClient'
 
-Click "Start" button in !SimManager.
-A dialog will ask if you want to continue without Paramics, click 'Yes'.
-The simulation clock display should begin counting the elapsed seconds.
+Click "Start" button in !SimManager. A dialog will ask if you want to continue without Paramics, click 'Yes'. The simulation clock display should begin counting the elapsed seconds.